Follow

Understanding SmartNet Mountpoints

SmartNet offers a wide range of Mountpoints to support all rovers & applications.  Below is a description of the Mountpoints that we support along with details about the particular Mountpoint.  

To determine the best correction format & Mountpoint for your particular rover, please visit our Connections & Configurations page.  These will contain the appropriate Mountpoint details, as well as Quick Guides for your particular rover. These Quick Guides contain all the information you will need to get connected to SmartNet including a section at the beginning that details the firmware & software versions needed for your particular equipment.

In an attempt to narrow the choices for our customers, we show a set of 'Recommended Mountpoints' and a set of 'Additional Mountpoints' tailored for your specific rover & your selected Corrections Area.  This curated selection of Mountpoints does not represent all the Mountpoints available, simply our recommended options.  For a complete listing of Mountpoints available in your Correction Area you will need to access the SourceTable and pull a complete listing of Mountpoints via your Rover interface.

Not all SmartNet license types have access to all Mountpoints based on price and market segment.  For example, a 1 yr SmartNet DGNSS Nationwide (decimeter accuracy) only has access to our DGPS Mountpoints, while a 1 yr SmartNet NRTK State / Sub-Region / Province has access to our standard Mountpoints (not including 'optimized' Mountpoints).

 

MountPoint Name MountPoint Description Correction Type
mc-icon

iMAX Solution optimized for iCON Machine Control

GPS+GLO (Network)
mc-icon-msm

iMAX GNSS Solution optimized for iCON Machine Control (MSM 5)

GNSS (Network)
mc-powerbox

iMAX Solution optimized for Powerbox Series Machine Control

GPS+GLO (Network)
MSM_IMAX

iMAX RTCM v3.2 (MSM 4)

GNSS (Network)
MSM_NEAR RTCM v3.2 (MSM 4) Nearest Station

GNSS (Single Base)

MSM_VIRS

VIRS RTCM v3.2 (MSM 4)

GNSS (Network)
RTCM2_DGPS_IMAX

iMAX RTCM v2.3 (Type 9,2) 

DGPS - GPS (Network)
RTCM2_DGPS_NEAR

RTCM v2.3 (Type 9,2) Nearest Station

DGPS - GPS (Single Base)

RTCM3_IMAX

iMAX RTCM v 3.x (Type 1004)

GPS+GLO (Network)
RTCM3_MAX

MAX RTCM v 3.x (Type 1004,1015,1016)

GPS+GLO (Network)
RTCM3_NEAR

RTCM v 3.x (Type 1004) Nearest Station

GPS+GLO (Single Base)
RTCM3_VIRS

ViRS RTCM v 3.x (Type 1004)

GPS+GLO (Network)
zeno

iMAX Solution optimized for Zeno Series GNSS

GPS+GLO (Network)
zeno-msm

iMAX GNSS Solution optimized for Zeno Series GNSS

GNSS (Network)
zeno_near

Nearest Solution optimized for Zeno Series GNSS

GPS+GLO (Network)

 

Mountpoint Details

To optimize rover performance, each mountpoint has certain operational criteria to make sure systems operate in a predictable & expected manner.  Please use the table below as an additional guide to understand what each Mountpoint offers.

MountPoint Name Supported Freq & Const Maximum Correction Distance
mc-icon GPS+GLO 100 km
mc-icon-msm GPS (incl. L5)+GLO+GAL+BDS 100 km
MSM_IMAX GPS (incl. L5)+GLO+GAL+BDS 100 km
MSM_NEAR GPS (incl. L5)+GLO+GAL+BDS 100 km
MSM_VIRS GPS (incl. L5)+GLO+GAL+BDS 50 km
RTCM2_DGPS_IMAX GPS Only 200 km
RTCM2_DGPS_NEAR GPS Only No Limit
RTCM3_IMAX GPS+GLO 100 km
RTCM3_MAX GPS+GLO 50 km
RTCM3_NEAR GPS+GLO 100 km
RTCM3_VIRS GPS+GLO 50 km
zeno GPS+GLO 200 km
zeno-msm GPS (incl. L5)+GLO+GAL+BDS 200 km
zeno_near GPS+GLO 300 km

For additional information about SmartNet GNSS Correction Services, please watch our Summer Update & GNSS Launch Webinar - LINK

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk