To get connected to SmartNet you will need the following:
- A valid SmartNet license
- A operational data connection (SIM, Mifi, etc)
- Your SmartNet License Username & Password (you can find this on your Activation Email or by visiting the SmartNet Portal
- The appropriate connection information, this can be found on our Connections & Configuration page
- Follow the instructions in the attached videos to setup your SP80 inside of Survey Pro
SmartNet Connection with Survey Pro
To utilize full GNSS RTCM 3.2 MSM corrections please verify that your SP80 is running the firmware version V3.36 (release date - 4/27/2018) or later.